Information below is from a mid-1970s LeGrand sales flier.
A hand written note indicates, "New prices include updates to 1978 GCR specs."
"A" Set (Assembly Drawings)
These drawings are complete, full-scale assembly drawings of suspension,
controls, and final drive system. They show location and assembly procedure
only for all parts. No dimensions are shown. "A" Set is used to
assemble the Disassembled Rolling Chassis shown below. The layouts may also be
used to adapt lightweight LeGrand components to other chassis designs.
9000-1 $7.50 Front Suspension Assembly
9000-2 $7.50 Rear Suspension Assembly
9000-3 $5.00 Steering Assembly
9000-4 $5.00 Pedals Assembly
9000-5 $5.00 Final Drive Assembly
$31.00 Complete Set
$1.00 Parts/Price List
9000-6 $5.00 Shift Linkage (hand written addition)
"B" Set (Construction Drawings)
These drawings are complete, half-scale construction drawings of the
monocoque tub, suspension, and controls. These drawings have all dimensions
and part numbers shown, and may be used by a competent builder to completely
fabricate the Mk 18 Constructors Kit shown below.
9000-1A $7.50 Front Suspension Details
9000-2A $7.50 Rear Suspension Details
9000-3A $5.00 Steering Details
9000-4A $5.00 Pedal Assembly Details
9000-5B-1 $5.00 Chassis General View
9000-5B-2 $5.00 Isometric View of Chassis
9000-5B-3 $5.00 Bulkhead #1 & #2
9000-5B-4 $5.00 Bulkhead #3
9000-5B-5 $5.00 Bulkhead #4
9000-5B-6 $5.00 Bulkhead #5 & #6
$55.00 Complete Set
Note: California residents add 6% sales tax.
The Disassembled Rolling Chassis
This kit includes all parts necessary to assemble a complete Mk 18 Sports
Racing car. Using Drawing Set "A", only hand tools are required for
assembly, and there is no welding to be done. All suspension and steering
parts are cadmium plated and tub bulkheads are painted and baked with gray enamel.
The kit includes completed tub bulkheads with tub skins cut and bent, ready
for drilling and riveting, an unpainted body, suspension, wheels, brakes, fuel
cell, steering, pedals, and a complete set of "A" Set Assembly
Drawings, and all items on the Parts/Price List.
The kit does not include engine, gearbox, starter, exhaust system, fire
system, tires, battery, upholstery, or oil tanks.
$6,325.00 Disassembled Rolling Chassis ($6,625.00 hand written change)
$7,600.00 Fully Assembled Rolling Chassis as above ($8,200 hand written
change)
Constructors Kit
This kits is strictly for the competent builder who wants to fabricate his
own monocoque tub and suspension. Using Drawing Set "B", all tub
bulkheads and skins, all suspension parts, and all pedal assembly parts are
fabricated by the builder, then using Drawing Set "A", all
components are assembled. This kit is recommended only for those experienced
in welding, close tolerance sheet metal fabrication, and general race car
fabrication.
The kit includes a complete body shell, front suspension uprights, hubs,
spindles, studs, and complete ball joint assemblies. The rear suspension hub
carriers, rear drive unit carrier with special stub drive shaft, complete rack
and pinion steering box, front and rear wheels, front and rear spring/shock
assemblies, and drawing sets "A" & "B".
Basically, the kit includes all components that are manufactured
exclusively by LeGrand Race Cars, allowing the builder freedom to purchase
remaining items at his discretion. The builder may elect to purchase from
LeGrand any component he would rather not make himself.
(All parts included in kit marked with asterisk on price list.)
$1,995.00 Constructors Kit ($2,395.00 hand written change)
Race Ready
A race ready Mk 18 may be supplied on special request only. Cost will vary
widely depending on engine/transmission used, and optional equipment desired.
Contact us with your requirements; we will be glad to quote you.
LeGrand Chassis Sales Brochure Page
1
DSR Home Page
